Water Tanks for the BriteTap® Waterer
Your BriteTap waterer is designed to attach to a container that acts as a water supply tank. This gives you the flexibility to choose a water tank that meets your size and budget.
Your BriteTap waterer kit includes a gasket and nut that allows you to attach the BriteTap quickly and easily to your water supply tank. Use a container you have on hand, or buy the BriteTap Combo pack that includes a 2-gallon insulated cooler.
The BriteTap waterer can be attached to Rubbermaid®, Igloo® and other brands of water coolers.* Suitable coolers have:
- Spigots that can be removed and are attached to the cooler with a removable nut.
- A spigot hole with a diameter of that is not smaller than 7/8 inches (20mm) and not larger than 1.1 inches (28mm)
Unfortunately, the BriteTap waterer can not be attached to Coleman® brand water coolers that use a spigot that is described as “dishwasher safe.” (See image of suitable spigots)
Attaching To Other Water Containers:
The BriteTap waterer can also be attached to a variety of water storage containers including: plastic pitchers, food-grade plastic pails, water containers designed for camping, and slimline refrigerator water dispensers.
To make these storage containers into a water tank for your BriteTap waterer, you will need to use an electric drill to make a hole in the side of the container.
*Rubbermaid®, Igloo® are and Coleman® are respectively the trademarks of Newell-Rubbermaid Inc., Igloo Products Corp., and The Coleman Company, Inc.